FAQ

Installation / Setup Tips (32)

• 1. Stop Error 0x1A in the nt!MiUpdateWsle function in Windows 8.1 or Windows Server 2012 R2.
• 2. Can't boot UEFI installed OS in Legacy mode?
• 3. Installing Oracle Linux 7 will generate the failure message : Failed to insert module 'autofs4'.
• 4. [Switch] Can Cumulus Linux runs on QuantaMesh Bare Metal Switch?
• 5. [Switch] Can I change the Network Operating System (NOS) on the QuantaMesh Bare Metal Switch?
• 6. [Switch] Can I replace the power supply unit (PSU) and fan to a different direction airflow by myself?
• 7. Cannot run under Administrative privileges java based Disk Management Utility under windows 2012
• 8. [Switch] How to break out a 40G port into 4x10G Ports in the QuantaMesh Ethernet T5032-LY6?
• 9. If user has run into an issue when setting up the bios that causes a no boot screen.
• 10. Is there a way to get MB SN via ipmi?
• 11. Please read the readme file before attempting upgrade BIOS/BMC.
• 12. Couldn't install UEFI CentOS 6.2 when BIOS Boot mode as UEFI
• 13. [Switch] How to break out a 40G port into 4x10G Ports in the QuantaMesh Ethernet T3048-LY8 and T3048-LY9?
• 14. RHEL 6.3 uEFI combined with tboot is not supported.
• 15. RHEL 7 can't install guest OS from CD/DVD-ROM.
• 16. RHEL 7.2 becomes black screen and "PECI over DMI interface error" logged in the BMC from boot splash to login screen.
• 17. Setting resolution by hot key ''CTRL'' + ''ALT'' + ''+'' or ''-'' doesn't work in RHEL7.
• 18. System doesn't shut down when doing graceful shutdown function via QSM.
• 19. Temperature difference between two JBR expanders
• 20. The HDD Connector Ports Are Reversed in QS3108 Option ROM
• 21. The SOL setting will not change after executing " ipmitool sol set set-in-progress commit-write 1. "
• 22. The firmware differences between M4600H FAB3 SIM & FAB5 SIM
• 23. [Switch] The position of Quad SFP+ (QSFP+) ports on QuantaMesh T3048-LY8 and T3048-LY9.
• 24. [Switch] The redundant power supply unit (PSU) in QuantaMesh Switch.
• 25. Unable to install RHEL6.5 on the RAID which build by sSATA controller under BIOS Setup.
• 26. [Switch] What can I do if I forget the username/password of my QuantaMesh Ethernet Switch?
• 27. [Switch] Why did the ports suddenly go down on QuantaMesh Bare Metal Switch with evaluation license of QuantaMesh Network OS ?
• 28. Windows 2012 R2 is failed to reprot the correct DIMM frequency
• 29. [Switch] How to change boot sequence on x86 QuantaMesh Switch (For IX1)
• 30. [Switch] For ONIE installing over network (For IX1)
• 31. VMD function support
• 32. Unable to boot into OS with RAID card if more than 50VD created.